A

推荐

Recommend

用酒精或异丙醇（IPA最佳）清洗，尽量减短清洗时间（2分钟以内）。吹干表面溶剂后进行无氧固化（20s内）（水中或者甘油中），喷砂打磨上光油。

1. Clean the model with Alcohol(IPA is better). Please control the clean time within two minutes.

2. Blow-dry the model surface with a air gun.

3. Water or glycerin cure less than 20s.

4. Polish and oil the model.

None

B

等待表面树脂流干，用气枪吹掉表面树脂，然后进行空气中的二次固化（30s内）。

1. Blow-dry the resin on model surface.

2. Paint evenly clear resin on the surface.

模型的细节会有点模糊

Lose some details

C

用酒精或异丙醇（IPA）清洗，尽量减短清洗时间（2分钟以内）。吹干表面溶剂，后刷一层透明树脂，空气中二次固化即可（30s内）。

1. Clean the model with Alcohol(IPA is better). Please control the clean time within two minutes.

2. Blow-dry the model surface with a air gun.

3. Paint evenly clear resin on the surface.

4. Cured the surfaceless than 20s.

模型的细节会有点模糊

Lose some details